Control up to 3 Relay Contacts Remotely

The RC-3 enables a standard Touch Tone phone to control up to 3 maintained ON, maintained OFF, or momentary relay contacts from a remote location. The RC-3 is fully user programmable and uses non-volatile E2 memory. Up to three RC-3’s can be daisy chained on the same line to control up to nine relays. The RC-3 features switchable 12V talk battery allowing easy installation on the trunk port. In addition, the unit can be connected directly to a C.O. line or analog PABX/KSU station. The RC-3 also features a built in pulse dialer activated by a contact closure from an alarm system, temperature sensor, etc. The RC-3 will dial the number up to three times sending alert tones indicating an emergency.

• Remote Control of:
• High security building entry systems
• Door strikes and gates in conjunction with doorboxes (W-1000, etc.)
<
• Signs, lights, cameras, sprinklers, motors Other contact controlled equipment
• Can also be used as an emergency dialer for alarm systems, etc.

• User Touch Tone programmable
• Non-volatile E2 memory
• 12 digit alarm activated pulse dialer
• 6 digit security code (to access programming)
• 6 digit access code (disable or enable for additional control security)
• Switchable 12V talk battery
• Relay interrogation tones
• Programmable relay time delays
• Cascade up to three RC-3’s to control up to nine relays
• Programmable ring delay before answering
• Status LED’s for relays 1, 2, 3 and the answer relay One power adaptor can power up to three units

• Power: 120V AC/12V DC 500mA UL listed adapter provided Shipping Weight: 3.6 kg (8 lbs)
• Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”) Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
• Pulse Dialing Speed: 10 pps
• Talk Battery Output: 12V DC minimum (15V nominal)
• Relay contact ratings: .5A @ 125V AC/1A @ 30V DC
• On hook time between alarm dialing: 2.5 seconds
• Connections: (2) RJ11 jacks, 10 position screw terminal strip