Control Relay Contacts Remotely

The RC-2A Remote Controller provides remote relay operation from any standard Touch Tone telephone. The controller is designed to be installed either locally or remotely. For local installations the RC-2A can be installed in series on any analog communications path, such as analog C.O. lines, analog PABX/KSU stations or Viking’s W-Series Doorboxes. and will passively monitor for Touch Tone commands. For off-premise applications, the RC-2A will answer analog C.O. lines or PABX/KSU stations after a selectable ring delay. A field programmable access code can also be programmed to prevent unauthorized usage. The RC-2A will then allow remote relay operation. Note: For applications where more than one relay closure is required, the RC-3 is available

• Remote Control of:
• High security building entry
• Heating/cooling equipment
• Pumps and fans
• Security systems
• Gates
• Lighting
• PABX/KSU reset

• Programmable access code
• Normally open or normally closed relay
• Selectable relay closure times
• Selectable ring delay (1, 2, 6, or 15)
• Easy installation with modular jacks and screw terminals Automatic disconnect or return to secure mode after 60 seconds
• One year warranty
• Made in the USA

• Power: 120VAC / 12VDC 500mA UL listed adapter provided, alternative power input: 12-24V AC/DC 200mA minimum
• Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”) Shipping Weight: .9 kg (2 lbs)
• Environmental: 0° C to 32° C (32° F to 90° F) with 5% to 95% non-condensing humidity
• Relay Contact Ratings: 5A @ 30VDC/250VAC
• Connections: (1) 8 position screw terminal block