Two-Input Voice Alarm Dialer

Two-Input Voice Alarm Dialer

Viking’s K-202-DVA is a fully programmable two-input, multi-number auto dialer, designed for emergency and non-emergency message notification. The K-202-DVA has two dry contact inputs, each of which can dial up to seven 32-digit phone numbers and play a message up to 1 minute in length specific to that input. Messages can be recorded locally or remotely with a total message time for both inputs of two minutes. The K-202-DVA has call progress detection capability with normal and fast busy, call pickup, CPC and ring-no-answer detection. Programming is easily done with a Touch Tone phone.

• Security/burglar/fire alarm notification
• System alarm or equipment malfunction notification
• Environmental warning notification
• Contacting personnel via numeric pagers

• Non-volatile memory (no batteries required)
• Stores up to seven 32-digit phone numbers (fourteen 32-digit numbers total)
• 2 minutes of record time (1 minute per input)
• Programmable message repeat counter
• Programmable lap counter
• Two inputs programmable normally open or normally closed and enabled or disabled
• Programmable ring delay for remote programming and alarm polling
• Programmable qualifier timer for each input (time for an event to be qualified as an alarm)
• Local or remote programming and recording
• Compatible with the RC-2A and RC-3 remote DTMF controllers
• Phone numbers may be programmed as pager numbers (no voice message played)

• Power: 120V AC/12V DC 500 mA, UL listed adapter provided
• Dimensions: 133mm x 91mm x 44mm (5.25” x 3.6” x 1.75”)
• Shipping Weight: 0.68 Kg (1.5 lbs)
• Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
• Talk Battery: 12V DC
• Touch Tone Dialing: 120 ms on/off, 50 ms on/off
• CPC Detection Time: 320 ms minimum
• Message Record Time: 2 minutes
• Sampling Rate: 64 K (equivalent)
• Input Detection Time: 80 ms with Qualifier Timer set to 0
• Resolution Qualifier Timer: 1 second to 18 hours
• Resolution Resume Timer: 1 second to 18 hours
• Connections: (1) RJ11 jack for telco connection, (1) 4
• position screw terminal block for inputs