Entry Phone with built-in Proximity Card Reader

Entry Phone with built-in Proximity Card Reader

The E-70 Series entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication. The E-70 also includes a built-in 125KHz HID compatible proximity card reader. The card reader outputs industry standard 26-bit Wiegand data, allowing it to be used with a Viking ES-1 door controller or any controller compatible with 26-bit Wiegand format. The E-70's compact size allows it to be mounted in a standard double gang electrical box. The E-70 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-70 faceplates (PNL70) can be purchased separately and are available in all five standard finishes. The E-70 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E-70 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer. The E-70 features a built-in proximity card reader, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For outdoor installations where the unit is exposed to precipitation or condensation, the E-70 Series is available with Enhanced Weather Protection (EWP). For more information on EWP, see DOD# 859.

• Door or gate communication, business delivery entrances
• Use with a Viking C-200 or C-250 to control one E-70 on a single phone line
• Use with a Viking C-2000B to control 1 to 4 E-70’s and door/gate control on a single phone line Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when used with a Viking SLP-1 or SLP-4 and C-2000B Residential, commercial and industrial door security
• Use with a Viking K-1900-5 or K-1900-30 for automatic speed dialing on telephone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable ringdown,capability.

• Built-in 125KHz HID compatible 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
• Audio and video transmission on one CAT5E cable
• Compact size: Front panel is the size of a typical double gang midsize wall plate
• Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.65” wide x 2.84” tall minimum) or surface mounts in a Viking model VE-5x5 (not included, see DOD# 424) for mounting to a wall, post or VE-GNP Gooseneck Pedestal (EWP recommended)
• Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
• PNL-70 faceplates: Replacement faceplates with matching screws available in all five standard finishes
• Vandal Resistant Features: 16 gauge polished brass or 18 gauge 304 stainless steel faceplate, 316 stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws
• Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-70-SS 304 Stainless Steel faceplate)
• E-70-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information)
• Blue LED helps locate the push button, indicate ringing and off-hook
• Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out,selectable auto answer feature for monitoring.
• VE-LIGHT: Optional faceplate light kit for use with the VE-5x5.

• Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20mA. Loop current may be boosted on low current lines with a Viking model TBB-1B Talk Battery Booster (see DOD# 632).
• Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”), Phone: 72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)
• Shipping Weight: 0.55 kg (1.2 lbs)
• Speaker Volume: Approximately 62db maximum @ 1m
• Ring Voltage: 25V AC RMS minimum (for auto answer)
• CPC Disconnect Time: 300ms minimum REN: 0.8A
• Operating Temperature: -34° C to 65° C (-30° F to 150° F)
• Humidity: Standard model: 5% to 95% non-condensing, EWP model: Up to 100%
• Connections: (5) gel-filled butt connectors (3M Scotchlok UR2)
• Recommended Electrical Box for Flush Mounting: Double gang with minimum inside dimensions of 2.25” deep x 3.65” wide x 2.84” tall (Carlon BH234R or equivalent)
• Recommended Surface Mount Box: Viking model VE-5x5 (DOD# 424)
• Power: 5 to 14V DC @ 60mA maximum
• Maximum Cable Length: 500 ft 24 Awg stranded shielded (Belden 9537)
• Frequency: 125KHz
• Format: 26 bit Wiegand
• Read Range: 1.25” to 2.0”
• Credential Compatibility: HID - Proxcard II,
• ISOProx II and ProxTag II and Pyramid Series Cards and Tags (PSC-1, PSI-4, PSM-2 and PSK-3)
• Transducer: Beeps during card read
• LED: Red, turns off during card read
• Humidity: Up to 100% (fully potted EWP)
• Operating Temperature: -34° C to 65° C (-30° F to 150° F)