Add Emergency Mass Notification Messages and Alert Tones to your Existing Paging System

Add Emergency Mass Notification Messages and Alert Tones to your Existing Paging System

The DNA-510 is a digital mass notification announcer, capable of providing up to 2 minutes of digitally recorded voice emergency instructions and alert tones over your existing paging system. The DNA-510 connects to a phone line, analog phone system station or a phone system�s unused trunk/line input allowing you to securely page, trigger emergency messages and/or alert tones and program the unit from any remote touch tone phone When activated, the DNA-510 will interrupt any current paging or background music and inject an emergency voice message and/or alert tone over your paging system. A live page can also be announced. The DNA-510 can be programmed to repeat one 2 minute message, two 1 minute messages, four 30 second messages or five 24 second messages. It can also be programmed with 10 different alert tones for emergency mass notification of: evacuation, lock down, severe weather, fire, hazardous material release, tornado, flash flood, terrorist alert, all-clear, etc. CLICK HERE to hear the different alert tones

• Provide Emergency Mass Notification for:

• Schools

• Restaurants

• Churches

• Theaters

• Auditoriums

• Dormitories

• Office buildings

• Non-volatile memory (no batteries required) Up to 2 minutes of total message record time Record up to 5 different emergency messages Ten different emergency alert tones: 1. Code 3 Temporal (ANSI S3.41) Slow Whoop 2. Hi/Low Siren 3. Wail Siren 4. Alert horn 5. Attack Siren 6. Fast Sweep Siren 7. March Time Horn 8. Bell 9. Buzzer 10. 1K Hz Steady Tone

• Call progress detection for automatic hang up on CPC, busy signal, dial tone or silence

• Separate volume controls for paging, messages and alert tones

• Automatically interrupts current page or background music to inject emergency announcement, alert tones or live page

• Programmable trigger input to activate a message and/or alert tone

• N.O. & N.C. trigger output contacts for activating flashing beacon (BLK-3-EWP), Alarm Dialer (K-202-DVA), etc. Security code to prevent fraudulent use

• Connects directly to an unused line input (trunk) or station port of a phone system or to a dedicated phone line

• Power:120V AC/13.8V AC 1.25A UL listed adapter provided

• Dimensions:133 mm x 91 mm x 44 mm (5.25� x 3.58� x 1.75�)

• Weight: 0.8 kg (1.76 lbs)

• Environmental:0�C to 32�C (32�F to 90�F) with 5% to 95% non-condensing humidity

• Connections:0�C to 32�C (32�F to 90�F) with 5% to 95% non-condensing humidity

• Audio output:600 ohm with volume adjustable potentiometer, maximum level = 2.2 dBm/ 1V RMS across 600 ohm load

• Page Trigger Output: 12V DC (20mA maximum) or N.O./N.C. relay contacts (1A 30V DC / 0.3A 110V AC maximum)