Viking Electronics K-600D Night Bell Over Paging Adapter

The K-600D eliminates the installation of multiple bells, relays and power supplies, whenever night bells, loud ringing or emergency tones are required. The K-600D provides an existing paging amplifier with a pleasant electronic warble tone each time it receives ring voltage from a C.O. line or analog PABX/KSU extension.

The K-600D requires no external power supply and provides a floating 600 ohm audio output. Auxiliary N.O./N.C. relay contacts are provided during ring signal for muting, switching or operation of external signaling devices. Volume and tone controls are also provided.

• Night bell over paging
• Loud ringing over paging
• Contact closure on ringing

• Provides tone over existing paging amplifiers
• Auxiliary relay contacts provided
• Connects directly to ringing C.O. Lines or analog PABX/KSU stations
• Floating 600 ohm output
• 1 year warranty
• Made in the USA

• Ring Voltage: 60V AC minimum, 15Hz - 70Hz
• Dimensions: 133mm x 89mm x 44mm (5.25 x 3.5 x 1.75)
• Shipping Weight: 1.36 kg (3 lbs.)
• Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
• Output: Floating 600 ohm , less than .5 VPP
• Connections: (1) RJ11 jack and 5 position screw terminal strip
• Maximum Cable Run: 15.24m (50 ft)
• Relay Contact Ratings: .5A @ 125V AC/1A @ 30V DC